Combining equal-axis strength with precision circular geometry, the Nezone YST 310 350 NB MS CHS (168.3 x 6.3 mm) - 6 mtr Length from Nezone is a cold-formed ERW CHS in YST 310 structural steel conforming to IS 1161:2014 (Steel Tubes for Structural Purposes). The 168.3 mm OD × 6.3 mm wall section (150 mm NB) in 6 m lengths achieves an optimal balance of axial capacity, torsional resistance, and fabrication ease for heavy engineering, crane columns, high-rise bracing, and long-span truss chords. With minimum yield of 310 MPa and tensile of 450 MPa, this tube meets the performance demands of heavy-duty structural, high-load, and long-span applications with consistent, traceable, IS-certified quality.

• Certified YST 310 ERW CHS meeting all structural requirements of IS 1161:2014
• Precise 168.3 mm OD with 6.3 mm wall thickness: consistent roundness and flush seam throughout
• Wall thickness 6.3 mm maintained within tight IS tolerances along the full 6 m length
• Consistent ERW weld quality: clean, flush seam on both internal and external surfaces
• Tensile strength 450 MPa for reliable performance under structural design loads
• Standard 6 m cut lengths with square ends for accurate joint detailing and fit-up
• Suitable for structural columns, struts, braces, trusses, and architectural applications
• Weld-ready surface with minimal surface scale from prime coil inputs
• Equal bi-directional bending capacity simplifies structural analysis and design
• Full quality documentation: heat number, grade, dimensions, and mechanical report available

• General engineering fabrication: frames, supports, and structural insert components
• Event and exhibition rigging towers, stage truss structures, and temporary grandstands
• Carport canopy columns, pergola uprights, and outdoor shade structure frameworks
• Residential and commercial staircases, balustrade uprights, and glass balcony posts
• Electrical substation structures, cable tray supports, and instrument stanchions
• Multi-level car park columns, flyover parapet posts, and elevated roadway supports
• Conveyor support gantries, overhead crane rails, and material-handling column sections