Produced to IS 4923:2017 Grade YST 210 by the cold-forming ERW process, the AST PIPES MS SHS AST YST 210 MS SHS - (65 x 65 x 3.2 mm) - 6 mtr Length offers a 65 mm square section with 3.2 mm wall thickness and 6 m standard length. This hollow section meets the minimum yield strength of 210 MPa and tensile strength of 330 MPa as required for general structural and light fabrication. The precisely formed corners and consistent wall thickness of this square tube ensure uniform stress distribution under multi-directional loading, offering superior performance over open sections of equivalent weight.

• IS 4923:2017 Grade YST 210 compliant with traceable mechanical test certificates
• ERW welded with controlled heat input for uniform weld zone properties
• Certified yield strength of 210 MPa for structural engineering design calculations
• Biaxially symmetric square profile simplifying connection and joint detailing
• Consistent wall thickness across all four sides ensures uniform load transfer
• Clean mill finish receptive to all protective coating systems including epoxy
• Standard 6 m cut lengths minimising on-site material wastage and joints
• Compatible with conventional bolted, welded, and mechanical fastening systems
• Low carbon equivalent supporting good cold-forming and field weldability
• UTS of 330 MPa providing adequate reserve strength under overload conditions

• Interior partition frames and lightweight mezzanine support members
• Storage shelving, racking, and pallet storage framework
• Signage structures, hoarding frames, and billboard supports
• Playground equipment, gym apparatus, and outdoor furniture
• HVAC duct support frames and mechanical services hanging
• Modular office furniture and workstation framing systems
• Light conveyor frames and material handling support structures
• Decorative architectural metalwork and handrail systems