Produced to IS 4923:2017 Grade YST 310 via the cold-forming ERW process, the AST PIPES MS RHS AST YST 310 MS RHS - (25 x 13 x 0.8 mm) - 6 mtr Length offers a 25 mm x 13 mm rectangular cross-section with 0.8 mm wall thickness and 6 m standard length. This hollow section meets minimum yield of 310 MPa and tensile strength of 450 MPa as required for heavy structural, high-load bearing frames, and primary column applications. The precisely formed rectangular geometry maximises depth-to-weight efficiency, allowing designers to achieve greater spans and reduced deflections compared to equivalent open structural sections.

• IS 4923:2017 Grade YST 310 compliant with traceable mechanical test certificates
• ERW welded with controlled heat input for uniform weld zone properties
• Certified yield strength of 310 MPa for structural engineering design calculations
• Rectangular geometry providing depth advantage for beam and spanning applications
• Consistent wall thickness across all four sides for uniform stress distribution
• Clean mill finish receptive to all protective coating systems including epoxy primers
• Standard 6 m cut lengths minimising on-site material wastage and splice joints
• Compatible with conventional bolted, welded, and mechanical fastening systems
• Low carbon equivalent supporting good cold-forming and field weldability
• UTS of 450 MPa providing adequate reserve strength under overload structural conditions

• Primary load-bearing beams in commercial and industrial high-span buildings
• Structural main chord and diagonal members in long-span lattice girders
• Foundation beam formers and ground beam structural members
• Heavy-duty equipment span frames in power and process plant facilities
• Rail infrastructure structural spanning members for overhead line gantries
• Crane rail primary support girders and hoist beam structural sections
• Primary structural spanning frames for sports arenas and exhibition halls
• Structural beams in petrochemical heavy industrial pipe rack systems