Birla TMT presents the Grade Fe 500 TMT Bar Birla Fe 500 TMT Bar - 10 mm, a thermomechanically treated IS 1786:2008 reinforcing bar with 10 mm nominal diameter in standard 12 m lengths. Certified to achieve 500 MPa yield, 545 MPa UTS, and 12% elongation, this bar is optimised for medium-duty reinforced concrete construction and infrastructure where controlled ductility and strength are paramount. The QST-process dual microstructure — hardened rim plus tough core — provides the unique combination of high strength and energy-absorbing capacity essential for earthquake-resistant concrete structures.

• Certified Fe 500 conforming to IS 1786:2008 reinforcing steel standard
• QST microstructure delivering 500 MPa yield with good toughness and elongation
• UTS 545 MPa meeting IS 1786 tensile strength requirements for structural RCC
• 12% minimum elongation ensuring controlled ductile behaviour in loaded members
• Ribbed geometry providing maximum mechanical bond with structural concrete
• Field weldable without preheat using standard electrodes and procedures
• Good corrosion performance in embedded concrete structural environments
• Standard 12 m length for efficient scheduling, transport, and on-site fixing
• Allows optimised bar schedules versus Fe 415 due to higher design yield
• Suitable for beams, columns, slabs, foundations, and retaining wall construction

• RCC frame buildings up to 10–15 storeys with conventional design
• Bridge deck slabs, abutments, and pier reinforcement
• Water treatment plant structures, tanks, and clarifier slabs
• Multi-level car park slabs, ramps, and structural frame elements
• Power plant civil structures including equipment pads and cable trenches
• Retaining walls, basement perimeter walls, and deep excavation supports
• Pre-stressed and pre-cast concrete secondary structural elements
• Harbour structures, jetty slabs, and marine concrete works