Combining spanning efficiency with precision dimensional accuracy, the Champak Steel YST 310 MS RHS - (40 x 20 x 1-2 mm) - 6 mtr Length from Champak Steel is a cold-formed ERW RHS in YST 310 structural steel conforming to IS 4923:2017 (Hollow Steel Sections for Structural Use). The 40 mm × 20 mm × 1.2 mm cross-section in 6 m lengths achieves an optimal balance of major-axis bending capacity, torsional resistance, and fabrication ease for heavy industrial frames, portal beams, truss chord members, and mezzanine girders. With minimum yield of 310 MPa and tensile of 450 MPa, this RHS meets the demands of heavy-duty structural, high-load, and long-span applications with traceable, certified quality.

• Certified YST 310 grade ERW RHS meeting all structural requirements of IS 4923:2017
• Precise 40 mm × 20 mm × 1.2 mm hollow section with well-defined corner geometry and sharp edges
• Wall thickness 1.2 mm maintained within tight IS tolerances along the full 6 m length
• Consistent ERW weld quality: clean, flush seam on both internal and external faces
• Tensile strength 450 MPa for reliable performance under design structural loads
• Standard 6 m cut lengths with square ends for accurate joint detailing
• Suitable for structural, architectural, and general engineering fabrication applications
• Weld-ready surface with minimal surface scale from prime coil inputs
• High major-axis section modulus reduces beam depth requirements for long spans
• Full quality documentation: heat number, grade, dimensions, and mechanical report available

• Machine tool beds, precision equipment base frames, and industrial fixture beams
• Event and exhibition stage truss spans, rigging beams, and display structure members
• Workshop overhead crane runway beams and hoist track support structures
• Residential and commercial staircase stringers, landing beams, and floor joist supports
• Heavy racking systems, cantilever storage arms, and pallet racking main beams
• General fabrication: custom lintels, header beams, spanning supports, and structural inserts
• Automotive and vehicle manufacturing jigs, fixture frames, and transfer line beams