G D Metsteel MS Equal Angle G D Metsteel E250A MS Angle - 65 x 65 x 6 mm is a hot rolled steel section produced to IS 2062:2011 Grade E250A, with identical legs of 65x65 mm and 6 mm wall thickness across a standard 12 m length. The equal leg configuration ensures symmetric stiffness and load paths, making connection design straightforward in lattice frames, trusses, and bracing systems. With a minimum yield strength of 250 MPa and good weldability, this section meets the demands of general structural steel fabrication and construction across a wide range of applications.

• Hot rolled equal angle conforming to IS 2062:2011 Grade E250A with traceable quality
• Perfectly matched legs for balanced load paths in trusses and structural frames
• Guaranteed 250 MPa minimum yield for design-critical structural steel members
• Mill-scale surface enabling flexible finishing: painting, sandblasting, or galvanizing
• 12 m standard lengths minimising fabrication waste and improving member continuity
• Weldable by MIG, SMAW, TIG, and SAW processes without special preheat requirements
• Suitable for cold punching, drilling, and shearing without microstructure compromise
• Meets IS 2062:2011 yield, elongation, and tensile performance requirements
• Ideal for both permanent structural assemblies and temporary works applications
• Comprehensive leg size range available for varied light to heavy structural uses

• Building structural frames and column bracing in industrial steel buildings
• Lattice girder chord and diagonal members for medium and long-span structures
• Industrial platform brackets, floor edge framing, and access stair members
• Wind and seismic bracing members in structural steel building systems
• Equal angle frame members for overhead crane runway secondary structures
• Material handling: hopper frames, chute liners, and transfer point supports
• Rural and agricultural structures requiring economical structural steel angles
• Power plant civil structural steel including pipe rack and cable tray supports