G D Metsteel E250A Equal Angle G D Metsteel E250A MS Angle - 75 x 75 x 6 mm is a hot rolled structural section conforming to IS 2062:2011, with symmetric legs of 75x75 mm and 6 mm thickness supplied in 12 m mill lengths. Equal leg angles are the most versatile structural profile in steel fabrication, offering equal stiffness about both axes and simplified connection geometry for bolted and welded joints. This section's certified 250 MPa yield strength and good elongation characteristics make it suitable for load-bearing and bracing applications across industrial, commercial, and infrastructure projects.

• Certified IS 2062:2011 Grade E250A equal angle with minimum 250 MPa yield
• Symmetric leg dimensions enabling equal stiffness about both principal axes
• Controlled hot rolling ensuring dimensional consistency along full 12 m length
• Good elongation providing structural ductility under static and dynamic loading
• Low carbon content for excellent site weldability with standard electrodes
• Standard 12 m mill length reducing on-site splicing and joint frequency
• Compatible with IS-standard bolt sizes and structural connection hardware
• Mill surface receptive to primers, epoxy coatings, and galvanizing systems
• Suitable for use in static, dynamic, and cyclic structural loading applications
• Traceable quality documentation supporting project QA and audit requirements

• Structural roof trusses and purlins in industrial and commercial buildings
• Symmetric bracing members in steel space frames and lattice structures
• Stair construction including stringers, risers, and intermediate landing frames
• Electrical transmission and distribution tower angular bracing chord sections
• Industrial equipment bases, skid frames, and machine support structures
• Solar panel mounting structures, ground mount racking, and support frames
• General fabrication: jigs, templates, frames, and structural support members
• Bridge secondary steel, railing supports, and expansion joint angle sections