Conforming to IS 2062:2011 Grade E250A, the G D Metsteel MS Equal Angle G D Metsteel E250A MS Angle - 90 x 90 x 8 mm is a hot rolled structural section with matched legs of 90x90 mm and 8 mm uniform thickness, supplied in 12 m standard lengths. The controlled hot rolling process imparts uniform grain structure and consistent E250A-grade mechanical properties throughout the section cross-section. Designed for symmetrical load transfer, this equal angle is widely used in structural steel fabrication for trusses, frames, and bracing where balanced performance on both legs is essential.

• Certified IS 2062:2011 Grade E250A equal angle with minimum 250 MPa yield
• Symmetric leg dimensions enabling equal stiffness about both principal axes
• Controlled hot rolling ensuring dimensional consistency along full 12 m length
• Good elongation providing structural ductility under static and dynamic loading
• Low carbon content for excellent site weldability with standard electrodes
• Standard 12 m mill length reducing on-site splicing and joint frequency
• Compatible with IS-standard bolt sizes and structural connection hardware
• Mill surface receptive to primers, epoxy coatings, and galvanizing systems
• Suitable for use in static, dynamic, and cyclic structural loading applications
• Traceable quality documentation supporting project QA and audit requirements

• Structural roof trusses and purlins in industrial and commercial buildings
• Symmetric bracing members in steel space frames and lattice structures
• Stair construction including stringers, risers, and intermediate landing frames
• Electrical transmission and distribution tower angular bracing chord sections
• Industrial equipment bases, skid frames, and machine support structures
• Solar panel mounting structures, ground mount racking, and support frames
• General fabrication: jigs, templates, frames, and structural support members
• Bridge secondary steel, railing supports, and expansion joint angle sections