Hariom YST 210 Rectangular Hollow Section Hariom YST 210 MS RHS - (60 x 40 x 3.6 mm) - 6 mtr Length is produced by ERW cold-forming to IS 4923:2017 with a 60 mm x 40 mm cross-section and 3.6 mm wall thickness in standard 6 m lengths. Delivering minimum yield of 210 MPa and tensile strength of 330 MPa, this RHS is engineered for general structural, light framing, furniture, and agricultural applications where directional load resistance and weld quality are critical. The four flat external faces and controlled corner radii simplify connection detailing and allow precise fit-up in fabricated beams, frames, and trusses.

• Grade YST 210 IS 4923:2017 certified RHS with guaranteed mechanical properties
• ERW process producing a continuous, sound weld seam along the full tube length
• Yield 210 MPa and tensile 330 MPa for design-critical structural applications
• Rectangular hollow geometry offering high section modulus-to-weight ratio
• Greater depth enables increased span capacity and reduced structural deflection
• Mill surface suitable for direct fabrication, painting, or hot-dip galvanizing treatment
• Comprehensive range of sizes from light profiles to heavy structural sections
• Standard 6 m lengths compatible with standard transport and storage infrastructure
• Good notch toughness and elongation for structural safety under impact loads
• Dimensional accuracy per IS 4923 tolerances for interchangeable and reliable fit-up

• Residential building secondary steel framing and home extension beam members
• Modular and prefabricated building panel and frame structural components
• Light industrial shelving uprights, racking beams, and cross frame members
• Kiosk, ATM enclosure, and security cabin primary structural beam sections
• Outdoor street furniture surrounds, planter boxes, and bench frame members
• Wayfinding, signage, and directional structure beam supports
• DIY hobbyist and custom metal fabrication structural beam profile sections
• Low-load equipment support bases and instrument stand beam framing members