Conforming to IS 2062:2011 Grade E250A, Kamdhenu E250A MS Flat Bar - (150 x 20 mm) - 6 mtr Length is a hot-rolled MS flat bar with 150 mm width and 20 mm thickness, engineered for structural bracing, tie bars, and fabricated members requiring 250 MPa minimum yield and consistent dimensional accuracy in 6 m standard mill lengths.

• Grade E250A per IS 2062:2011 — 250 MPa yield and 410–540 MPa tensile strength
• Flat bar with smooth top and bottom faces for precise bearing and clamping
• Low carbon equivalent ensures good field weldability without preheat in most cases
• Standard 6 m lengths support repetitive cutting patterns and reduce joint frequency
• Can be bent cold to moderate radii without cracking under site conditions

• Mezzanine floor edge bars, platform perimeter members, and kicker plates
• Tank strap supports, pressure vessel saddle flats, and pipeline restraint bars
• Shipbuilding deck edge bars, bracket flats, and reinforcing strap members
• Transformer base flats, switchgear frame members, and substation connections
• Trailer chassis outriggers, truck body floor bars, and vehicle frame supports