Conforming to IS 2062:2011 Grade E250A, Kamdhenu E250A MS Flat Bar - (30 x 3 mm) - 6 mtr Length is a hot-rolled MS flat bar with 30 mm width and 3 mm thickness, engineered for structural bracing, tie bars, and fabricated members requiring 250 MPa minimum yield and consistent dimensional accuracy in 6 m standard mill lengths.

• Grade E250A per IS 2062:2011 — 250 MPa yield and 410–540 MPa tensile strength
• Flat bar with smooth top and bottom faces for precise bearing and clamping
• Low carbon equivalent ensures good field weldability without preheat in most cases
• Standard 6 m lengths support repetitive cutting patterns and reduce joint frequency
• Can be bent cold to moderate radii without cracking under site conditions

• Mezzanine floor edge bars, platform perimeter members, and kicker plates
• Tank strap supports, pressure vessel saddle flats, and pipeline restraint bars
• Shipbuilding deck edge bars, bracket flats, and reinforcing strap members
• Transformer base flats, switchgear frame members, and substation connections
• Trailer chassis outriggers, truck body floor bars, and vehicle frame supports