The Powersol MS Unequal Angle Powersol E250A MS Unequal Angle - 75 x 50 x 6 mm is a hot rolled structural steel section produced to IS 2062:2011, Grade E250A specifications. With asymmetric legs of 75x50 mm and 6 mm thickness, it provides engineers with greater design freedom for frame connections, edge reinforcements, and gusset attachments. Manufactured under controlled rolling conditions, this 12 m length angle delivers repeatable mechanical properties that structural designers and fabricators can rely upon.

• Hot rolled IS 2062:2011 Grade E250A unequal angle with guaranteed structural properties
• Asymmetric configuration suited for bracket, cleat, and connection plate design
• Consistent 250 MPa minimum yield with reliable elongation and UTS values
• Mill-scale surface enabling direct painting or sandblasting prior to coating
• 12 m standard lengths to reduce material joints and improve structural continuity
• Compatible with MIG, SMAW, and submerged arc welding procedures
• Manufactured under controlled rolling temperature for uniform metallurgical properties
• Suitable for cold punching, drilling, and shearing operations on-site
• Meets structural steel specifications for building, industrial, and infrastructure use
• Angle geometry allows simultaneous attachment to two perpendicular structural members

• Steel frame structures requiring asymmetric connection geometry
• Truss and lattice bracing members in roofing and wall systems
• Industrial platform and mezzanine edge framing and stair stringers
• Telecom and transmission tower cross-arm and bracing angles
• Equipment support frames in process industries and power generation
• Conveyor structure supports and transfer tower angular members
• Railway overhead line equipment structures and gantry framing
• Marine jetty and offshore deck framing where unequal angles suit connections