Produced to IS 4923:2017 Grade YST 210 via the ERW cold-forming process, the Spark MS RHS Spark YST 210 MS RHS - (200 x 200 x 8 mm) - 6 mtr Length offers a 200 mm x 200 mm rectangular cross-section with 8 mm wall thickness and 6 m standard length. This hollow section meets minimum yield of 210 MPa and tensile strength of 330 MPa as required for general structural, light framing, and furniture-grade applications. The precisely formed rectangular geometry maximises depth-to-weight efficiency, allowing designers to achieve greater spans and reduced deflections versus equivalent open sections.

• IS 4923:2017 Grade YST 210 compliant with traceable mechanical test certificates
• ERW welded with controlled heat input for uniform weld zone properties
• Certified yield strength of 210 MPa for structural engineering design calculations
• Rectangular geometry providing depth advantage for beam and spanning applications
• Consistent wall thickness across all four sides for uniform stress distribution
• Clean mill finish receptive to all protective coating systems including epoxy primers
• Standard 6 m cut lengths minimising on-site material wastage and splice joints
• Compatible with conventional bolted, welded, and mechanical fastening systems
• Low carbon equivalent supporting good cold-forming and field weldability
• UTS of 330 MPa providing adequate reserve strength under structural overload conditions

• Interior partition frames and lightweight mezzanine secondary beam members
• Storage shelving beam sections and pallet racking cross frame members
• Signage structures, hoarding frames, and outdoor billboard supports
• Playground equipment, gym apparatus frames, and outdoor furniture structures
• HVAC duct support beams and mechanical services hanging frame members
• Modular office workstation, cubicle, and reception counter framing systems
• Light conveyor frames and material handling support structural members
• Decorative architectural metalwork, handrails, and balustrade frame sections